Key Features:
- No of Pages: 75
- No of Chapters: 05
Introduction:
Abstract
This project involves the route survey which includes: reconnaissance survey, theodolite traversing and leveling operations as well as soil tests which includes; plastic limit test, liquid limit tests and moisture content determination, compaction tests and California bearing ratio tests.
This project also involves the design of the pavement and the geometric design of the roadway.
Table of Content
Title Page
Latter Of Transmittal
Approval Page
Dedication
Acknowledgement
Abstract
Table of Contents
CHAPTER ONE
1.1 General Introduction
1.2 Reconnaissance survey
1.3 Geometric design
1.4 Factors influencing the choice of station
1.5 Factors which favour the selection of route or road alignment.
1.6 Aim and objective of the project
1.7 Scope of the project.
CHAPTER TWO
2.1 Brief description of the theodolite
2.2 Theodolite traversing
2.3 Procedure for traversing
2.4 Traversing instruments
2.5 Conversion to whole circle bearing
CHAPTER THREE
3.1 Levelling
3.2 Longitudinal sections or profiles
3.3 Cross section
3.4 The need for sections
3.5 The purpose, uses and importance of leveling.
3.6 Instrument used in leveling
3.7 Terminologies used in leveling
3.8 Levelling procedure
3.9 Earth work computation
3.10Volume computation
CHAPTER FOUR
4.1 Collection of samples
4.2 Laboratory soil test
4.3 Type of laboratory test carried out
4.4 Compaction test
4.5 California bearing ratio test
4.6 Computation of CBR test result
4.7 Mechanical analysis
4.8 Atterberg limit test
4.9 Liquid limit test
4.10Plastic limit test
4.11Pavement design
4.12Function of the components of a flexible road pavement.
4.13Group index method of pavement design
4.14Design data using CBR method.
CHAPTER FIVE
5.1 Curves
5.2 Factors affecting the design of curves
5.3 Types of curves
5.4 Advantages of transition curves
5.5 Super elevation
5.6 Design of the horizontal curve
5.7 Criteria for the choice of the formation line.
5.8 Vertical curves
5.9 Stages of work in the actual road construction
5.10Equipment used for the actual road construction
5.11Recommendation
5.12Conclusion.
Introduction
The introduction of this research is only available in the paid version.
Buy Now
