Key Features:

- No of Pages: 81

- No of Chapters: 08

Buy Now

Introduction:

Abstract

This work on the construction and fabrication of a mobile deep freezer revolves around the concept of refrigeration. The concept of refrigeration revolves around the reverse Carnot cycle. This is a cycle involving isentropic expansion (at the throttling valve), isothermal expansion (at the evaporator), isentropic compression (at the compressor) and isothermal compressor ( at the condenser) Compression raises the temperatures of the refrigerant above that of its natural surrounding so that it can give up its heat in a heat exchanger to a heat sink such as air or water (condenser). Expansion lowers the refrigerant temperature below the temperature that is to be produced inside the cooling compartment.

Table of Content

Title page

Approval page

Dedication

Acknowledgment

Abstract



Chapter one:

Introduction



Chapter Two:

Literature Review



Chapter Three:

Design Analysis and Calculations

3.1 Determination and choice of condenser and Evaporator temperature.

3.2 Cooling Load Calculation

3.3 Flow Rate

3.3.1 Mass flow rate

3.3.2 Ton of Refrigeration

3.3.3 Volume flow rate

3.4 Determination of Compressor size

3.5 Determination of pipe size and length

3.5.1 Comparing the velocities for different pipe size.

3.5.2 Summary table.



Chapter Four:

Construction Details

4.1 Material Selection

4.2 Sequence of operation

4.3 Assembly



Chapter Five:

Cost Analysis



Chapter Six:

Recommendation

6.1 Maintenance and use Instructions

6.1.1 Condenser Maintenance

6.1.2 Defrosting

6.1.3 Other Instructions

6.1.4 Common Complaints, Causes and Remedy



Chapter Seven:

Refrigerants

7.1 Requirements for refrigerants

7.2 Identifying Refrigerants by number

7.3 Halide refrigerants

7.4 Grouping and Classification of refrigerants

7.5 Group one Refrigerants

7.6 R-12 Dichlorodi Fluoromethane (ccl2f2)

7.7 R-22 Monochlorodi fluoromethane (CHCLF2)

7.8 R-11 Trichloromono fluoromethane (CCL3F)

7.9 Azeotropic Mixtures

7.10 R-500 Refrigerant

7.11 R-502 Refrigerant (R-22 + R-115) (CHCLF2/CCLF2 CF3)

7.12 R-503 Refrigerant (R-23 +R-13) (CHF3/CCLF3).

7.13 R-504 Refrigerant (R-32 +R115) (CH2F2 (F3 CCLF2)

7.14 Group two refrigerants

7.15 R- 717 Ammonia (NH3)

7.16 Group three refrigerants

7.17 Expendable Refrigerants

7.18 Water as a Refrigerants

7.19 Refrigerant Cylinders

7.20 Color code for refrigerants cylinders



Chapter Eight:

Conclusion

Reference.

Introduction

The introduction of this research is only available in the paid version.