Key Features:

- No of Pages: 24

- No of Chapters: 05

Buy Now

Introduction:

Abstract

Conveying goods from one place to another via trucks has been a long-held practice because of its usefulness. There are different types of trucks that are available in this regard such as ; two axle, three axle, four axle trucks etc and each with its unique functionality.

Businesses relying on the movement of bulky raw materials and finished goods regardless of the distance no doubt require a truck to ease this task.

In line with this challenge, it is desired to design and construct an iron truck of 200kg capacity capable of conveying bulky materials from one location to another.

The truck was properly designed with all the necessary design calculations accounting for the axle load, gross overall weight etc

It was ensured that a good material of construction (Aluminum) was used for the fabrication because of its strength, high resistance to corrosion and its wear resistance.

Table of Content

Title Page

Abstract

Table of Contents

List of Symbols

Table of Figures



CHAPTER ONE

1.0 Introduction

1.1 Aim and Objectives

1.2 Statement of problems

1.3 Relevance of the project

1.4 Scope and limitation of study

1.5 Methodology



CHAPTER TWO

2.0 Literature Review

2.1 Brief history of trucks

2.2 Weight distribution of a truck

2.3 Common parts of a truck

2.4 Related mathematical formulae



CHAPTER THREE

3.0 Detailed design and fabrication procedure

3.1 Design specifications and considerations

3.2 Design calculations

3.3 Fabrication details

3.4 Detailed mechanical drawing of the Iron truck



CHAPTER FOUR

4.0 Test and Result

4.1 Test procedure

4.2 Test results



CHAPTER FIVE

5.0 Conclusion and Recommendation

5.1 Conclusion

5.2 Recommendation



REFERENCES

Introduction

After the creation and widespread application of footpaths, which are extensively discussed in Ways of the World (Lay 1992), the world's second major transport development was the use of animals, initially as beasts of burden and subsequently for pulling ploughs and sleds. The invention of the wheel was a much later development. When freight first had to be moved, human hands, shoulders, hips, and heads were all gainfully employed. When the capacity of the unaided human was exceeded, the solid stick was the obvious tool to use, first to transfer the load to the shoulders and then to allow it to be shared as a yoke between two people. For less coherent loads, the technology expanded to include wicker baskets hung from the shoulders by rope or carried on the head. Such people powered freight techniques are still in quite effective use today in parts of Asia and Africa.

Experienced porters can carry 25 kg whilst travelling at 25 km/day. For shorter distances, loads of about half body-weight are common, and peak loads over very short distances can exceed 175 kg. The Chinese have used labourers carrying slings and bamboo poles to move loads of up to a tonne distributed at about 25 kg per bearer.

After series of development, the next stage of transport development was probably associated with the enhancement of the sled and travois. Small rollers between the pole ends of the travois or under a sled would have usefully reduced the dragging friction. A number of societies used such devices which were commonly called truck or truckle carts.(Maxwell,L.2005)