Key Features:
No of Pages: 91
No of Chapters: 5
Abstract:
The sole purpose of this project work is to determine the settlement characteristics of soil for the construction of building, a case study at FUTO Senate Building area and FUTO NDDC hostel area, other objectives are the classification of the soil, determination of the strength properties of these soils and also making of sundry recommendations about the type of foundation most suitable for the construction of buildings on these soils. Soil samples were collected from FUTO Senate Building areas and FUTO NDDC hostel. Physical and classification tests were carried out to determine the nature of the soils present at these study areas.
These tests are the bulk, dry density test, and sieve analysis test. These tests were conducted in accordance to BS 1377. The soil sourced from FUTO Senate Building area at a depth of 2.5 m has a bulk density of 1.9 Kg/m3 and a dry density of 1.7 Kg/m3 with a moisture content of about 15.3%, while that from FUTO NDDC hostel at a depth of 2.25 m has a bulk density, dry density and moisture content of 1.9 Kg/m3 , 1.6 Kg/m3 and 17.9% respectively. A consolidation test was carried out and the settlement of the soil was obtained from data’s obtained from this test within the range of 8.3 – 8.5 mm. Plate load tests were also carried out at both study areas resulting to a safe bearing capacity of 722.33 KN/M2 and total settlement of 16.05 mm at FUTO Senate Building area, and 720 KN/M2 and total settlement of 18.2 mm at FUTO NDDC hostel area. The soil sourced from the study areas has good engineering properties and was recommended for the construction of buildings with pad and strip foundations.
Table of Content:
Title Page……………………………………………..……………….i
Certification ........................................................ii
Approval............................................................. iii
Dedic...................................................................iv
Acknowledgement .............................................v
Abstract ..............................................................vi
List of Tables ......................................................x
List of Figure.......................................................xi
CHAPTER ONE
INTRODUCTION ..................................................1
1.1 Background of Study....................................1
1.2 Problem Statement.......................................2
1.3 Objective of the Study ..................................2
1.4 Significance of Study ...................................3
1.5 Scope of Study..............................................3
1.6 Limitations of Study .....................................4
CHAPTER TWO
LITERATURE REVIEW .........................................5
2.1 Soil.................................................................5
2.2 History of Soil as an Engineering Material..5
2.3 Geotechnical Properties of Soil...................7
2.4 Grain Size Distribution..................................8
2.4.1 Sieve Analysis..........................................10
2.5 Consolidation and Compressibility ...........11
2.6 Shear Strength of Soil.................................13
2.6.1 Introduction..............................................13
Buy Now
