Physics
WAEC 2009
- You are provided with a measuring cylinder, two different tins labeled C and D, a thermometer, and other necessary materials.
- Use the measuring cylinder provided to measure 100 cm of water and pour it into the tin label.
- Heat the water in the tin almost to boiling (90°C).
- Remove the tin and place it on a cork or wooden stand.
- Insert the thermometer into the tin and record the temperature of the water every minute starting from 85°C until the temperature falls to 60°C.
- Repeat the experiment with the tin labeled D using exactly the same volume of water and temperature range. Tabulate your readings.
- On the same graph sheet and using the same axis and scales, plot two graphs of temperature on the vertical axis and time on the horizontal axis from the readings obtained using tins C and D.
- Label the graphs appropriately as C and D to correspond with the tins used.
- From each graph, read off the time taken to cool from 85°C to 65°C.
- State two precautions taken to ensure accurate results.
(b)i. Explain how heat losses by radiation and convection are minimized in a vacuum flask.
ii. State four factors that affect the rate of evaporation of a liquid in an open container.
Explanation
| Table of value (observation) |
| S/N |
t(min) |
Tc(°C) |
To(°C) |
| 1 |
0.00 |
85.00 |
85.00 |
| 2 |
1.00 |
83.00 |
84.00 |
| 3 |
2.00 |
81.00 |
83.00 |
| 4 |
3.00 |
79.00 |
81.00 |
| 5 |
4.00 |
78.00 |
79.00 |
| 6 |
5.00 |
75.00 |
78.00 |
| 7 |
6.00 |
73.00 |
76.00 |
| 8 |
7.00 |
71.00 |
75.00 |
| 9 |
8.00 |
70.00 |
73.00 |
| 10 |
9.00 |
68.00 |
71.00 |
| 11 |
10.00 |
66.00 |
69.50 |
| 12 |
11.00 |
65.00 |
68.00 |
| 13 |
12.00 |
63.00 |
66.00 |
| 14 |
13.00 |
62.00 |
64.00 |
| 15 |
14.00 |
60.00 |
62.00 |
| 16 |
15.00 |
- |
61.00 |
| 17 |
16.00 |
- |
60.00 |
Time taken to cool from 85°C to 65°C
Tin C = 11 minutes
Tin D = 12.40 minutes
Precautions: i
- ensured there was no error due to parallax when reading my thermometer.
- ensured that the liquid in the tins was gently stirred.
(b)i. Silvered wall minimized radiation.
Insulating cork minimized convection.
(i) Factors affecting the rate of evaporation.
- Temperature
- Nature of liquid.
- Humidity
- Area of liquid surface exposed
- Draught
Report an Error
Ask A Question
Download App
Quick Questions
Contributions ({{ comment_count }})
Please wait...
Modal title
Report
Block User
{{ feedback_modal_data.title }}